Product Range
Guidance Strips & Markers
T2-103 Path Marker
The T2-103 Path Marker is designed to ensure visibility of specified building features in escape routes for compliance with any performance based building codes.
Luminance Properties
Meets Level 1 acceptance criteria (listed below) of PLC Daylight Charging Simulation Test Method for Photoluminescent Egress Path Marking Systems. View Test Method here.
After charging ceases, minimum luminance readings shall not be less than:
20.7mcd/m2 after 120 minutes
8.7mcd/m2 after 240 minutes
6.6mcd/m2 after 300 minutes
3.7mcd/m2 after 480 minutes
2.9mcd/m2 after 600 minutes
Suitable for use indoors and outdoors.
T2-103 Path Marker
Available in 1 metre and 3.06 metre lengths.
Width: 42mm
Compliance
Luminance Properties
Meets Level 1 acceptance criteria (listed below) of PLC Daylight Charging Simulation Test Method for Photoluminescent Egress Path Marking Systems. View Test Method here.
After charging ceases, minimum luminance readings shall not be less than:
20.7mcd/m2 after 120 minutes
8.7mcd/m2 after 240 minutes
6.6mcd/m2 after 300 minutes
3.7mcd/m2 after 480 minutes
2.9mcd/m2 after 600 minutes
Suitable for use indoors and outdoors.
Specification
T2-103 Path Marker
Available in 1 metre and 3.06 metre lengths.
Width: 42mm
Resources







